Projects · Solid hardwood

Charbdin Place Residence

Solid red oak, site-finished · St. Matthews, Louisville

Red oak hallway floor running past the base of an oak staircase toward a sliding glass door
The job

Solid red oak across the entire main level of a house being renovated end to end — kitchen, dining room, living room, entry, hallway and stair treads. Old covering and underlayment came out first, then the subfloor was checked flat before a board went down.

The floor was laid as one field in a single run direction with no transition strips at the doorways, which is what lets the eye carry from the fireplace hearth all the way to the kitchen island. Boards were racked to keep end joints from stacking up and to keep short pieces out of the sight lines.

Everything went in raw and was sanded, edged and finished in place, including the stair treads and newels so the color reads the same on the floor and the stairs. Finish coats were cut in after the trim carpenters were out and before the house was turned over.

Bid a similar project

The
work

One field, no transitions
Open living room with red oak flooring, a stacked stone fireplace at left and the kitchen visible beyond
The living room field looking toward the kitchen — same run, same finish, no break at the opening.
Red oak flooring in a dining room continuing into a white kitchen through a wide cased opening
Oak carried under the cased opening and into the kitchen, finished tight to the cabinet toe kicks.
Staircase with red oak treads and newel posts matching the surrounding floor, with black iron balusters
Treads and newels finished with the floor so the color matches across both surfaces.
Kitchen with red oak flooring, a quartz waterfall island and white cabinetry, with the living room beyond
Looking back from the kitchen — one uninterrupted floor across three rooms.
General contractor on this project

Trademark Development Group — the full renovation

Solid red oak
Material installed
Residential
Sector
Louisville, KY
Location
Complete
Project status

Send the prints.

We'll send back a number. Upload drawings and a scope, or call the office and talk it through.